合適的點膠機是怎么選擇出來的？
如何選擇合適的點膠機?下面小編給大家簡單介紹一下。
How to choose the right dispenser? Here is a brief introduction.
膠黏劑:通用點膠機用單組分膠黏劑、AB膠用雙液膠黏劑、PU膠膠黏劑、UV膠專用噴射器。
Adhesive: single component adhesive for general dispenser, double liquid adhesive for ab adhesive, PU adhesive, special sprayer for UV adhesive.
2、點膠過程:正常點膠使用半自動點膠機(如腳踏控制)、定位線、選擇桌面、三軸、畫圓等自動功能點膠機。分配器的自動功能實際上是一個輔助功能。分配器有更多的功能來控制粘合劑，但其他功能可以通過自動機器人來實現。
2. Dispensing process: the semi-automatic dispensing machine (such as foot pedal control), positioning line, desktop selection, three-axis, circle drawing and other automatic function dispensing machines are used for normal dispensing. The automatic function of the distributor is actually an auxiliary function. The dispenser has more functions to control the adhesive, but other functions can be realized by an automatic robot.
3、工作效率和環境:產品少，效率低，不追求手工膠槍的使用;戶外作業使用膠槍。你需要管理游戲和使用機器。對于自動分配，使用自動機器。
3. Work efficiency and environment: few products, low efficiency, do not pursue the use of manual glue gun; use glue gun for outdoor operation. You need to manage games and use machines. For automatic allocation, use an automatic machine.
4. 成本:有各種配藥方案，但不是所有配藥都需要機器，也不是所有的自動配藥都連接到配藥機。從成本角度考慮，如果需要使用太多的膠機，請考慮更換膠機。如果帶有自動功能的分配器太昂貴，考慮移動產品而不是分配頭。
4. Cost: there are various dispensing schemes, but not all dispensing requires machines, and not all automatic dispensing is connected to the dispensing machine. From a cost point of view, if you need to use too many glue machines, please consider replacing the glue machine. If the allocator with automatic function is too expensive, consider moving the product instead of the allocation head.
The above content is compiled by dispensing machine. This view does not represent the view of this site.
上一篇：落地點膠機質量的依據與標準！
下一篇：點膠機使用廣泛的原因是怎樣的?
