雙組份打膠機知液灌膠機的清洗辦法
在電子，LED光電，五金，塑膠等行業，雙液灌膠機被越來越多的客戶所運用!
In electronics, LED photoelectricity, hardware, plastic and other industries, double liquid glue machine is used by more and more customers!
很多客戶在初次運用后，都有問到灌膠機的清洗成績。不曉得怎樣去清洗，在這里我們就做一下復雜的解說。假如是帶自動清洗的灌膠機，那操作起來就相當復雜了，只需按一下操作面板上的清洗按鈕，機器就會自動的去完成。假如機器不帶自動清洗功用，那麼普通如何去清洗呢?
Many customers have asked about the cleaning results of the glue filling machine after their first use. I don't know how to clean it. Here we will give a complicated explanation. If it's a glue filling machine with automatic cleaning, it's quite complicated to operate. Just press the cleaning button on the operation panel, and the machine will finish automatically. If the machine does not have the function of automatic cleaning, how do you usually clean it?
，看膠水的性質。假如單液的膠水，而且在常溫不是很容易固化的膠水，那麼每次點完或許灌完產品后，下次所用到的膠水還是相反時，可以不思索清洗成績。假如是厭氧膠、快干膠相似于401，502這樣的膠水或許相似硅膠之類的常溫下會比擬快固化的膠水，那麼是要清洗的。清洗的時分，先將沒用完的膠水排完，然后將無機溶劑，如天那水、工業酒精，放到機器外面。然后將這些無機溶劑和膠水一同壓出來，再用氣槍吹開即可。
First, look at the nature of glue. If a single solution of glue is not easy to solidify at room temperature, then after each order or filling of the product, the next time the glue used is the opposite, you can not think about the cleaning results. If anaerobic and quick-drying glue are similar to 401,502 or silica gel, they will be similar to fast-curing glue at room temperature, then they should be cleaned. When cleaning, the unused glue is discharged first, and then inorganic solvents, such as Tianna water and industrial alcohol, are put outside the machine. Then these inorganic solvents and glue are pressed out together and blown away with an air gun.
雙組份打膠機
用此類型的機器，清洗是非常必要的，否則的話，膠水固化在膠閥中，或許是料桶中就很費事，能夠有些配件就要改換了。所以每次用完后，一定要記得清洗!雙液灌膠機A B膠混合局部只要出膠口的攪拌管，所以清洗局部只要攪拌管，其他局部都不必清洗;
With this type of machine, cleaning is very necessary, otherwise, the glue solidified in the rubber valve, perhaps in the barrel is very troublesome, can some accessories will be changed. Therefore, after each use, we must remember to clean! The mixing part of double-liquid glue filling machine A-B glue only needs the mixing pipe of the outlet, so the cleaning part only needs the mixing pipe, and the other parts need not be cleaned;
假如是雙組份膠水的雙液灌膠機，那麼清洗就比擬復雜了，任務完成后將灌膠機后面的白色混合管拆上去放到無機溶劑外面浸泡一下即可，或許換一根混合管。
If it is a two-component glue filling machine, then the cleaning is more complicated. After the task is completed, remove the white mixing pipe behind the glue filling machine and put it outside the inorganic solvent for soaking. Maybe replace it with a mixing pipe.
綜上所述有濟南昌盛機械提供，更多雙組份打膠機知識，歡迎關注我們的網站：http://www.jncsjx.com謝謝支持!
In summary, all the above-mentioned Jinan Changsheng Machinery provides more knowledge of two-component glue machine. Welcome to our website: http://www.jncsjx.com. Thank you for your support!
上一篇：車輛維修基本常識要掌握
下一篇：如何避免雙組份結構膠混合不均勻？
