打膠機的打膠環節和打膠機之間的關系
可能很多人會疑問，雙組份打膠機的打膠環節和打膠機有什么關系。接下來，小編就給大家一起來說一下
濟南雙組份打膠機的打膠環節和打膠機的關系。
Many people may wonder what is the relationship between the gluing link of the two-component gluing machine and the gluing machine. Next, let's talk about the relationship between the gluing link of Jinan two-component gluing machine and the gluing machine.
一塊合格的打膠機不僅在于規范的操作流程與的工藝技術，更需要能滿足打膠機性能的打膠機加工設備和與其相關的密封材料。不同的打膠機的密封差異可能讓打膠機終呈現的工藝成品以及綜合性能不同。
A qualified glue applicator not only lies in the standardized operation process and perfect technology, but also needs the glue applicator processing equipment and related sealing materials that can meet the performance of the glue applicator. The sealing difference of different glue applicators may make the final finished products and comprehensive performance of the glue applicator different.
打膠機的密封主要采用密封膠，起到打膠機的密封作用。打膠機的密封，除紫外線照射是測試打膠機密封膠是否含有影響視線的有機揮發物外，另外四項指標“密封性能、初始露點、高溫高濕、氣候循環”，都是檢測打膠機在各種環境下的密封性能的。打膠機的密封主要采用密封膠，起到打膠機的密封作用。
Sealant is mainly used for the sealing of glue applicator, which plays the sealing role of glue applicator. For the sealing of the glue applicator, in addition to ultraviolet radiation, which is used to test whether the confidential sealing glue contains organic volatiles that affect the line of sight, the other four indicators "sealing performance, initial dew point, high temperature and humidity, and climate cycle" are used to test the sealing performance of the glue applicator in various environments. Sealant is mainly used for the sealing of glue applicator, which plays the sealing role of glue applicator.
單道密封打膠機是難以滿足打膠機的密封性能的。為彌補這些膠的密封性能的不足，通常采用水汽透過率低，但結構性差的聚異丁烯膠作為打膠機的道密封膠，以阻止潮氣向打膠機內滲透，這就是傳統的大家熟悉的雙道密封打膠機的生產工藝。
Single pass sealing glue applicator is difficult to meet the sealing performance of glue applicator. In order to make up for the lack of sealing performance of these adhesives, polyisobutylene adhesive with low water vapor transmission but poor structure is usually used as the first sealant of the glue applicator to prevent moisture from penetrating into the glue applicator. This is the traditional production technology of double seal glue applicator that everyone is familiar with.
由于雙道密封打膠機所采用的二種密封膠各自性能上的缺陷，只能采用兩者結合的方式（即雙道密封式）才能滿足打膠機的密封性和結構性指標。現在有一些新型打膠機密封膠：結構型熱熔丁基密封膠。
Due to the defects in the performance of the two sealants used by the double seal glue applicator, only the combination of the two (i.e. double seal type) can meet the sealing and structural indicators of the glue applicator. Now there are some new types of sealant: structural hot melt butyl sealant.
打膠機主要用于打膠機的打膠環節，也就是我們平時所說的密封環節。打膠機主要針對打膠機的道密封。使用專用設備將熱熔丁基膠加熱熔化后，用打膠機將丁基膠涂打膠機的涂膠部位。
The gluing machine is mainly used for the gluing link of the gluing machine, which is what we usually call the sealing link. The glue applicator is mainly for the first seal of the glue applicator. Use special equipment to heat and melt the hot-melt butyl adhesive, and then apply the butyl adhesive to the gluing part of the gluing machine with a gluing machine.
這個打膠速度要掌握好，因為丁基膠幾分鐘就冷卻定型，打膠速度不宜過快過慢。過快的情況下很容易導致打膠不飽滿，日后影響打膠機的密封問題。過慢的情況下影響打膠機的工作效率問題。
The gluing speed should be well controlled, because the butyl glue will be cooled and shaped in a few minutes, and the gluing speed should not be too fast or too slow. If it is too fast, it is easy to cause insufficient gluing, which will affect the sealing of the gluer in the future. Too slow affects the working efficiency of the glue applicator.
The relationship between the gluing link of the gluing machine and the gluing machine is what we have explained above. If you still don't understand this, please come to our website http://www.666202688.com Consult and have a look.
上一篇：二手打膠機如何挑選不踩雷
下一篇：關于打膠機的一些問題分析
