教你灌膠機的保養方法！
灌膠機的保養方法是怎么做的
How to maintain the glue machine
1、清潔灌膠設備表面的灰塵以及AB膠的污漬;
1. Clean the dust on the surface of glue-filling equipment and the stain of AB glue;
2、檢查潤滑系統是否正常;
2. Check whether the lubrication system is normal.
3、檢查機器、工作臺、導軌以及主要滑動面是否可以支持正常運作;
3. Check whether machines, workbenches, guideways and main sliding surfaces can support normal operation.
4、檢查灌膠機的各類設置是否正常;
4. Check whether all kinds of safety settings of glue filling machine are normal.
5、檢查機器是否有異常聲音;
5. Check whether the machine has abnormal sound.
6、電源開關、啟動開關等是否靈活，XYZ軸是否準確、可靠停止。
6. Whether the power switch and start switch are flexible, and whether the XYZ axis is accurate and reliable to stop.
7、檢查灌膠機的工作臺、導軌及主要滑動面有無新的拉、研、碰傷等，如有情況，需立即報告相關人員查看，并做好記錄。
7. Check whether there are any new pull, research and bump on the worktable, guide rail and main sliding surface of the glue filling machine. If there is any situation, it is necessary to report to the relevant personnel immediately for inspection and record.
自動點膠機的驅動機構
Driving mechanism of automatic dispensing machine
自動點膠機的驅動機構主要分為四種，主要包括：液壓驅動、氣壓驅動、電氣驅動以及機械驅動。
The driving mechanism of automatic dispensing machine is mainly divided into four kinds, including hydraulic drive, pneumatic drive, electrical drive and mechanical drive.
但是絕大部分的點膠機都會采用電氣、氣動驅動，因為自動點膠機設備采用這兩種驅動系統可以更好地節省用膠，使得膠水資源能夠合理利用，降低了不少點膠成本!
But most dispensing machines will use electric and pneumatic drive, because the automatic dispensing machine equipment using these two drive systems can better save the use of glue, make the rational use of glue water resources, reduce a lot of dispensing costs!
上一篇：介紹中空玻璃打膠機怎么操作！
下一篇：傳感器為什么使用雙液點膠機設備？
