雙液打膠機需要考慮什么問題?
為了適應不同的需求，市場上的打膠機種類多樣，而雙液打膠機是目前應用較為廣泛的設備，在較多行業中都會有所應用，哪選用雙液打膠機需要考慮什么問題？
In order to meet different needs, there are various types of glue beaters on the market, and the double-liquid glue beater is currently widely used equipment, which will be applied in many industries, which choice of double-liquid glue beater need to consider what issues?
AB環氧樹脂、AB聚氨酯、AB有機硅等這些膠水都是十分常用，對于使用雙液混合點膠粘結效果的需求，選用雙液打膠機能比普通打膠機實現更好的效果，雙液打膠機能夠根據不同的混合膠水比例可以很好的把握膠水的固化時間，從而更利于產線生產的需要！
AB epoxy resin, AB polyurethane, AB organosilicon and other glue are very common. For the need of using double-liquid mixing point bonding effect, double-liquid glue beater is selected to achieve better effect than ordinary glue beater. Double-liquid glue beater can grasp the curing time of glue according to different proportion of mixed glue, which is more conducive to the needs of production line.
選用雙液打膠機需要考慮的問題：
Problems to be considered in selecting double-liquid glue beater:
所用膠水的混合比例：任何一種打膠機對膠水的混合比例都有一個范圍，常見的有100：100——100：10；如果所用的膠水不在這個范圍，那就要重新考慮了。
The mixing ratio of glue used: There is a range of mixing ratio of glue used by any type of glue beater. The common mixing ratio is 100:100-100:10. If the glue used is not in this range, it should be reconsidered.
膠水里面有沒有填料：雙液灌膠機控制出膠量的方式有兩種，一種是通過齒輪泵，一種是通過螺桿泵！齒輪泵在遇到含有填料的膠水時，時間久了易磨損，進而造成出膠量不準，混合比例不精準，出現點出來的產品長時間不干。螺桿泵相比較而言，較耐磨損一些，這些都是根據需求進行選擇！
Is there any filler in the glue? There are two ways to control the amount of glue produced by the double-liquid glue filling machine, one is through gear pump, the other is through screw pump! When the gear pump encounters the glue containing filler, it is easy to wear and tear for a long time, which results in inaccurate glue output, inaccurate mixing ratio and long time non-drying of the products. Compared with screw pump, it is more wear-resistant, these are based on the needs of choice!
產品點膠需求：要考慮產品每次限制小的點膠量是多少，比如要點的產品是1克，膠水配比是10：1，那相當于B膠的出膠量要達到0.1克，機器的限制小出膠量是多少，你買機器時就要對比比較，看能否達到要求！
Demand for dispensing products: Consider the minimum dispensing quantity of each product limit. For example, the key product is 1 gram and the ratio of glue is 10:1. That is equivalent to 0.1 gram of B glue. How much is the glue quantity of the machine limit? When you buy the machine, you should compare and compare it to see if it can meet the requirement or not! _______
產量效率：生產量大的話可考慮帶XYZ機械手，或者多頭的打膠機，雖然這樣的設備更高，但是亦都能夠帶來更好的效率。生產量小的話，用單頭打膠機，甚不帶XYZ機械手的都可完成！
Production efficiency: If the production capacity is large, consider a XYZ manipulator or a multi-head glue beater. Although such equipment is more expensive, it can also bring better efficiency. If the production is small, it can be accomplished with a single-end glue machine, even without XYZ manipulator.
上一篇：打膠機日常怎樣保養比較好？
下一篇：雙組份打膠機是由哪幾部分組成?
